10° F - 100° F Range
Operates 1 - 120V Heater Only
1. Plug the thermostat into an outlet of the proper voltage for the heating equipment.
2. Plug the heater cord into the receptacle holes in the thermostat’s plug. If the heater has a built-in on/off switch or heat regulator, be sure it is in the ON position.
3. With power on, turn thermostat knob toward the “warmer” position (clockwise) or “cooler” position (counter clockwise) until the heater goes on. Then adjust, as needed, to set air temperature at which you want the heater on.
No posts found