10° F - 100° F Range
Operates 1 - 120V or 240V Heater
1. Wire thermostat in series with the electrical circuit supplying the heater outlets. Be sure to properly ground the thermostat enclosure and the receptacle.
2. If a power regulator is also wired in the same circuit, wire the thermostat in series before the power regulator.
3. With power on and all other on—off switches in the “on” position, turn thermostat knob toward the “warmer” position (clockwise) until the heater goes on. Then adjust, as needed, to set the air temperature at which you want the heater to be on.
No posts found